Installation guide

12-21
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 12 Configuring Traffic Policies
Setting Match Conditions for Class Maps
Step 6 Do the following:
• Click Deploy Now to deploy this configuration on the ACE and to return to the Match Condition
table.
Note If you click Deploy Now, the ACE drops the traffic and then restarts it, even if you have not
made changes. If you have not altered existing match conditions, click Cancel instead of
Deploy Now to ensure uninterrupted traffic.
• Click Cancel to exit this procedure without saving your entries and to return to the Match Condition
table.
• Click Next to configure another match condition for this class map.
Related Topics
• Configuring Virtual Context Class Maps, page 12-8
• Configuring Virtual Context Policy Maps, page 12-34
Setting Match Conditions for RTSP Server Load Balancing Class Maps
Use this procedure to set match conditions for a RTSP server load balancing class map.
Assumption
You have configured a RTSP server load balancing class map and want to establish match criteria.
Procedure
Step 1 Choose Config > Virtual Contexts > context > Expert > Class Maps. The Class Maps table appears.
Step 2 In the Class Maps table, select the RTSP server load balancing class map you want to set match
conditions for. The Match Condition table appears.
Step 3 In the Match Condition table, click Add to add match criteria, or select the match condition you want to
modify, and then click Edit. The Match Condition configuration screen appears.
Step 4 In the Sequence Number field, enter an integer from 2 to 255.
Table 12-9 RADIUS Server Load Balancing Class Map Match Conditions
Match Condition Description
Calling Station ID A unique identifier of the calling station is used to establish a match condition.
In the RADIUS Calling Station ID field, enter the calling station identifier to match. Valid entries
are strings containing 1 to 64 alphanumeric characters. See Table 12-33 for a list of the supported
characters that you can use for matching string expressions.
User Name A username is used to establish a match condition.
In the User Name field, enter the name to match. Valid entries are strings containing 1 to 64
alphanumeric characters. See Table 12-33 for a list of the supported characters that you can use
for matching string expressions.