Installation guide

9-34
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 9 Configuring SSL
Enabling Client Authentication
Step 3 Enter the information in Table 9-13.
Step 4 Do the following:
• Click Deploy Now to deploy this configuration on the ACE. The updated Certificate Revocation
List table appears.
• Click Cancel to exit the procedure without saving your entries and to return to the Certificate
Revocation List table.
• Click Next to deploy your entries and to add another entry to the Certificate Revocation List table.
Related Topics
• Configuring SSL Proxy Service, page 9-28
• Configuring SSL Authentication Groups, page 9-32
Table 9-13 SSL Certificate Revocation List
Field Description
Name Enter the CRL name. Valid entries are unquoted alphanumeric strings with a
maximum of 64 characters.
URL Enter the URL where the ACE retrieves the CRL. Valid entries are unquoted
alphanumeric strings with a maximum of 255 characters. Only HTTP URLs
are supported. ACE checks the URL and displays an error if it does not
match.