Installation guide

8-22
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-01
Chapter 8 Configuring Parameter Maps
Configuring Skinny Parameter Maps
Step 4 Do the following:
Click Deploy Now to deploy this configuration.
Click Cancel to exit this procedure without saving your entries and to return to the SIP Parameter
Maps table.
Click Next to deploy your entries and to configure another SIP parameter map.
Related Topics
Configuring Parameter Maps, page 8-1
Configuring Traffic Policies, page 12-1
Configuring Virtual Contexts, page 4-1
Configuring Skinny Parameter Maps
Skinny Client Control Protocol (SCCP or Skinny) parameter maps allow you to configure SCCP packet
inspection on the ACE.
Use this procedure to configure a Skinny parameter map.
Procedure
Step 1 Select Config > Virtual Contexts > context > Load Balancing > Parameter Maps > Skinny
Parameter Maps. The Skinny Parameter Maps table appears.
Step 2 Click Add to add a new parameter map, or select an existing parameter map, and then click Edit to
modify it. The Skinny Parameter Maps configuration screen appears.
Step 3 Configure the parameter map using the information in Table 8-10.
Table 8-10 Skinny Parameter Map Attributes
Field Description
Parameter Name Enter a unique name for the parameter map. Valid entries are unquoted text strings with no
spaces and a maximum of 64 alphanumeric characters.
Description Brief description of the parameter map. Enter a text string with a maximum of
240 alphanumeric characters (A–Z, a–z, 0–9). Spaces and special characters are allowed.
Double quotes must be entered as matching pairs.
Enforce Registration You can configure the ACE to allow only registered Skinny clients to make calls. To
accomplish this task, the ACE maintains the state of each Skinny client. After a client registers
with CCM, the ACE opens a secure port (pinhole) to allow that client to make a call.
Check the check box to enable Skinny registration enforcement.
Clear the check box to disable this feature.