Installation guide

6-56
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 6 Configuring Real Servers and Server Farms
Configuring Health Monitoring
RADIUS Probe Attributes
Note Click More Settings to access the additional attributes for the RADIUS probe type. By default, ACE
appliance Device Manager hides the probe attributes with default values and the probe attributes which
are not commonly used.
RTSP Probe Attributes
Note Click More Settings to access the additional attributes for the RTSP probe type. By default, ACE
appliance Device Manager hides the probe attributes with default values and the probe attributes which
are not commonly used.
Port Enter the port number that the probe is to use. By default, the probe uses port
inheritance to determine the port number. For more information, see the
general attribute Port field description.
TCP Connection
Termination
Check box that when checked, configures the ACE to terminate TCP
connections gracefully by sending a FIN to the server. Uncheck the check
box to configure the ACE to terminate a TCP connection by sending an RST.
Open Timeout Enter the number of seconds to wait when opening a connection with a real
server. Valid entries are integers from 1 to 65535, and the default value is 1.
Table 6-21 RADIUS Probe Attributes
Field Action
User Secret Enter the shared secret to be used to allow probe access to the RADIUS
server. Valid entries are case-sensitive strings with no spaces and a
maximum of 64 characters.
User Name Enter the user identifier to be used for authentication on the real server. Valid
entries are unquoted text strings with a maximum of 64 characters.
Password Enter the password to be used for authentication on the real server. Valid
entries are unquoted text strings with a maximum of 64 characters.
Reenter the password in the Confirm field.
More Settings
Port Enter the port number that the probe is to use. By default, the probe uses port
inheritance to determine the port number. For more information, see the
general attribute Port field description.
NAS IP Address Enter the IP address of the Network Access Server (NAS) in dotted-decimal
format, such as 192.168.11.1.
Table 6-20 POP Probe Attributes (continued)
Field Action