Installation guide

6-55
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 6 Configuring Real Servers and Server Farms
Configuring Health Monitoring
POP Probe Attributes
Note Click More Settings to access the additional attributes for the POP probe type. By default, ACE
appliance Device Manager hides the probe attributes with default values and the probe attributes which
are not commonly used.
Table 6-19 IMAP Probe Attributes
Field Action
User Name Enter the user identifier to be used for authentication on the real server. Valid
entries are unquoted text strings with a maximum of 64 characters.
Password Enter the password to be used for authentication on the real server. Valid
entries are unquoted text strings with a maximum of 64 characters.
Reenter the password in the Confirm field.
Mailbox Name Enter the user mailbox name from which to retrieve e-mail for this IMAP
probe. Valid entries are unquoted text strings with a maximum of
64 characters.
Request Command Enter the request method command for this probe. Valid entries are text
strings with a maximum of 32 characters and no spaces.
More Settings
Port Enter the port number that the probe is to use. By default, the probe uses port
inheritance to determine the port number. For more information, see the
general attribute Port field description.
TCP Connection
Termination
Check box that when checked, configures the ACE to terminate TCP
connections gracefully by sending a FIN to the server. Uncheck the check
box to configure the ACE to terminate a TCP connection by sending an RST.
Open Timeout
(Seconds)
Enter the number of seconds to wait when opening a connection with a real
server. Valid entries are integers from 1 to 65535, and the default value is 1.
Table 6-20 POP Probe Attributes
Field Action
User Name Enter the user identifier to be used for authentication on the real server. Valid
entries are unquoted text strings with a maximum of 64 characters.
Password Enter the password to be used for authentication on the real server. Valid
entries are unquoted text strings with a maximum of 64 characters.
Reenter the password in the Confirm field.
Request Command Enter the request method command for this probe. Valid entries are text
strings with a maximum of 32 characters and no spaces.
More Settings