Installation guide

6-53
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 6 Configuring Real Servers and Server Farms
Configuring Health Monitoring
Request HTTP URL This field appears if you select Head or Get in the Request Method Type
field.
Enter the URL path on the remote server. Valid entries are strings of up to
255 characters specifying the URL path. The default path is “/’.
Cipher Select the cipher suite to be used with this HTTPS probe:
• RSA_ANY—The HTTPS probe accepts all RSA-configured cipher
suites and that no specific suite is configured. This is the default action.
• RSA_EXPORT1024_WITH_DES_CBC_SHA
• RSA_EXPORT1024_WITH_RC4_56_MD5
• RSA_EXPORT1024_WITH_RC4_56_SHA
• RSA_EXPORT_WITH_DES40_CBC_SHA
• RSA_EXPORT_WITH_RC4_40_MD5
• RSA_WITH_3DES_EDE_CBC_SHA
• RSA_WITH_AES_128_CBC_SHA
• RSA_WITH_AES_256_CBC_SHA
• RSA_WITH_DES_CBC_SHA
• RSA_WITH_RC4_128_MD5
• RSA_WITH_RC4_128_SHA
SSL Version Select the version of SSL or TLS to be used in ClientHello messages sent to
the server:
• All—The probe is to use all SSL versions.
• SSLv3—The probe is to use SSL version 3.
• TLSv1—The probe is to use TLS version 1.
By default, the probe sends ClientHello messages with an SSL version 3
header and a TLS version 1 message.
More Settings
TCP Connection
Termination
Check box that when checked, configures the ACE to terminate TCP
connections gracefully by sending a FIN to the server. Uncheck the check
box to configure the ACE to terminate a TCP connection by sending an RST.
Append Port Host Tag Check the check box to append port information in the HTTP Host header
when you configure a non-default destination port for an HTTPS probe.
Clear the check box to not append the port information in the HTTP Host
header.
Open Timeout
(Seconds)
Enter the number of seconds to wait when opening a connection with a real
server. Valid entries are integers from 1 to 65535, and the default value is 1.
User Name Enter the user identifier to be used for authentication on the real server. Valid
entries are unquoted text strings with a maximum of 64 characters.
Table 6-18 HTTPS Probe Attributes (continued)
Field Action