Installation guide

6-46
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 6 Configuring Real Servers and Server Farms
Configuring Health Monitoring
Step 6 Enter the attributes for the specific probe type selected:
• For DNS probes, see Table 6-12.
• For Echo-TCP probes, see Table 6-13.
• For Echo-UDP probes, see Table 6-14.
• For Finger probes, see Table 6-15.
• For FTP probes, see Table 6-16.
• For HTTP probes, see Table 6-17.
• For HTTPS probes, see Table 6-18.
• There are no specific attributes for ICMP probes.
• For IMAP probes, see Table 6-19.
• For POP probes, see Table 6-20.
• For RADIUS probes, see Table 6-21.
• For RTSP probes, see Table 6-22.
• For Scripted probes, see Table 6-23.
• For SIP-TCP probes, see Table 6-24.
• For SIP-UDP probes, see Table 6-25.
• For SMTP probes, see Table 6-26.
• For SNMP probes, see Table 6-27.
• For TCP probes, see Table 6-28.
• For Telnet probes, see Table 6-29.
• For UDP probes, see Table 6-30.
HTTPS 443
ICMP Not applicable
IMAP 143
POP3 110
RADIUS 1812
RTSP 554
Scripted 1
SIP (both TCP and UDP) 5060
SMTP 25
SNMP 161
Telnet 23
TCP 80
UDP 53
VM 443
Table 6-11 Default Port Numbers for Probe Types (continued)
Probe Type Default Port Number