Installation guide

6-39

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 6 Configuring Real Servers and Server Farms

Configuring Health Monitoring

Related Topics

• Configuring Server Farms, page 6-18

• Adding Real Servers to a Server Farm, page 6-26

• Configuring Health Monitoring, page 6-39

• Configuring Server Farm HTTP Return Error-Code Checking, page 6-36

• Configuring Dynamic Workload Scaling, page 6-14

Displaying Server Farm Statistics and Status Information

You can display statistics and status information for a particular server farm.

Procedure

Step 1 Choose Config > Virtual Contexts > context > Load Balancing > Server Farms.

The Server Farms table appears.

Step 2 In the Server Farms table, choose a server farm from the Server Farms table, and click Details.

The show serverfarm name detail CLI command output appears. For details about the displayed output

fields, see the Server Load-Balancing Guide, Cisco ACE Application Control Engine, Chapter 2,

Configuring Real Servers and Server Farms.

Step 3 Click Update Details to refresh the output for the show serverfarm name detail CLI command.

The new information appears in a separate panel with a new timestamp; both the old and the new server

farm statistics and status information appear side-by-side to avoid overwriting the last updated

information.

Step 4 Click Close to return to the Server Farms table.