Installation guide

5-63
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 5 Configuring Virtual Servers
Managing Virtual Servers
The Virtual Servers table appears.
Step 2 In the Virtual Servers table, choose a virtual server from the Virtual Servers table, and click Details.
The show service-policy policy_name class-map class_name detail CLI command output appears. For
details about the displayed fields, see the Server Load-Balancing Guide, Cisco ACE Application Control
Engine.
Note This feature requires ACE software Version A3(2.1) or later. An error displays with earlier
software versions.
Step 3 (Optional) Click Update Details to refresh the window information.
Step 4 Click Close to return to the Virtual Servers table.
Related Topics
• Configuring Virtual Servers, page 5-2
• Managing Virtual Servers, page 5-63
• Viewing All Virtual Servers, page 5-65
Managing Virtual Servers
After you have created a virtual server the following options are available:
Viewing Virtual Servers by Context
Use this procedure to view all virtual servers associated with a virtual context.
Procedure
Step 1 Select Config > Virtual Contexts. The All Virtual Contexts table appears.
Step 2 Select the context associated with the virtual servers you want to view, and then select Load
Balancing > Virtual Servers. The Virtual Servers table appears with the following information:
• Virtual server name
• Configured state, such as Inservice
• Virtual IP address
Task Related Topics
Modify a virtual server configuration Configuring Virtual Servers, page 5-2
List virtual servers by virtual context Viewing Virtual Servers by Context, page 5-63
Activate a virtual server Activating Virtual Servers, page 5-64
Suspend a virtual server Suspending Virtual Servers, page 5-65
View all virtual servers and its configured state Viewing All Virtual Servers, page 5-65