Installation guide

5-13
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 5 Configuring Virtual Servers
Configuring Virtual Servers
Port By default, this field appears with the default port number for the specified
protocol.
To change the port number, enter the port to be used for the specified
protocol. Valid entries are integers from 0 to 65535 or a range of integers,
such as 10-20. Enter 0 (zero) to indicate all ports.
For a complete list of protocols and ports, see the Internet Assigned
Numbers Authority available at www.iana.org/numbers/.
All VLANs Check the check box to support incoming traffic from all VLANs. Clear the
check box to support incoming traffic from specific VLANs only.
Table 5-2 Virtual Server Properties – Advanced View (continued)
Field Description