Installation guide

4-84
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 4 Configuring Virtual Contexts
Managing Virtual Contexts
Editing Virtual Contexts
Use this procedure to modify the configuration of an existing virtual context.
Procedure
Step 1 Choose Config > Virtual Contexts.
The All Virtual Contexts table appears.
Step 2 Choose the virtual context and then select the configuration attributes you want to modify.
For information on configuration options, see the “Configuring Virtual Contexts” section on page 4-7.
Step 3 Click Deploy Now to deploy this configuration on the ACE appliance.
To exit a procedure without saving your entries, click Cancel, or select another item in the menu bar or
another attribute to configure. A window appears, confirming that you have not saved your entries.
Related Topic
• Using Virtual Contexts, page 4-2
Deleting Virtual Contexts
Use this procedure to remove an existing virtual context.
Procedure
Step 1 Choose Config > Virtual Contexts.
The All Virtual Contexts table appears.
Step 2 Chose the virtual context you want to remove and then click Delete.
A window appears, asking you to confirm the deletion.
Step 3 Do one of the following:
• Click OK to delete the selected context. The device tree refreshes and the deleted context no longer
appears.
• Click Cancel to exit this procedure and to retain the selected context.
Related Topic
• Using Virtual Contexts, page 4-2
Viewing All Virtual Contexts
To view all virtual contexts, choose Config > Virtual Contexts. The All Virtual Contexts table appears.