Installation guide

4-66
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 4 Configuring Virtual Contexts
Configuring Security with ACLs
Step 5 Click Add To Table if you want to add one or more ACL entries to the table.
See Step 4 for information on configuring the extended ACL entries.
Step 6 Associate any VLAN interface to this ACL if required and do one of the following:
• Click Deploy to immediately deploy this configuration.
• Click Cancel to exit without saving your entries and to return to the ACL Summary table.
Related Topics
• Configuring Security with ACLs, page 4-58
• Creating ACLs, page 4-59
• Setting EtherType ACL Attributes, page 4-67
• Resequencing Extended ACLs, page 4-66
• Editing or Deleting ACLs, page 4-69
Resequencing Extended ACLs
Use this procedure to change the sequence of entries in an Extended ACL. EtherType ACL entries cannot
be resequenced.
Procedure
Step 1 Choose Config > Virtual Contexts > context > Security > ACLs.
The ACLs table appears, listing the existing ACLs.
Step 2 Choose the Extended ACL you want to renumber and then click the Resequence icon appearing to the
left of the filter field.
The ACL Line Number Resequence window appears.
Step 3 In the Start field, enter the number that is to be assigned to the first entry in the ACL.
Table 4-20 ICMPv6 Type Names and Numbers
ICMP Type Name Number
Echo 128
Echo-Reply 129
Information-Reply 140
Information-Request 139
Parameter-Problem 4
Redirect 137
Time-Exceeded 3
Traceroute 30
Unreachable 1