Specifications

7-159
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 7 Cisco Management Information Base
CISCO-CDP-MIB
STATUS current
DESCRIPTION
Indicates the size of the largest datagram that can be sent/received by remote device, as reported in
the most recent CDP message. This object is not instantiated if no MTU field (TLV) was reported
in the most recently received CDP message.
::= { cdpCacheEntry 16 }
cdpCacheSysName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Indicates the value of the remote device sysName MIB object. By convention, it is the device fully
qualified domain name. This object is not instantiated if no sysName field (TLV) was reported in
the most recently received CDP message.
::= { cdpCacheEntry 17 }
cdpCacheSysObjectID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Indicates the value of the remote device sysObjectID MIB object. This object is not instantiated if
no sysObjectID field (TLV) was reported in the most recently received CDP message.
::= { cdpCacheEntry 18 }
cdpCachePrimaryMgmtAddrType OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
An indication of the type of address contained in the corresponding instance of
cdpCachePrimaryMgmtAddress.
::= { cdpCacheEntry 19 }
cdpCachePrimaryMgmtAddr OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
This object indicates the (first) network layer address at which the device will accept SNMP
messages as reported in the most recently received CDP message. If the corresponding instance of
cdpCachePrimaryMgmtAddrType has the value ip(1), then this object would be an IP-address. If the
remote device is not currently manageable via any network protocol, this object has the special