Specifications

7-60
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 7 Cisco Management Information Base
CISCO-CCM-MIB
::= { ccmGlobalInfo 21 }
ccmPhoneExtensionTableStateId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The current state of ccmPhoneExtensionTable. The initial value of this object is 0 and it will be
incremented every time when there is a change (addition/deletion/modification) to the
ccmPhoneExtensionTable. This value and ccmCallManagerStartTime should be used together to
find if the table has changed or not. When the call manager is restarted, this will be reset to 0.
::= { ccmGlobalInfo 22 }
ccmPhoneStatusUpdateTableStateId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The current state of ccmPhoneStatusUpdateTable. The initial value of this object is 0 and it will be
incremented every time when there is a change (addition/deletion/modification) to the
ccmPhoneStatusUpdateTable. This value and sysUpTime should be used together to find if the table
has changed or not. When the SNMP service is restarted this value will be reset to 0.
::= { ccmGlobalInfo 23 }
ccmGatewayTableStateId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The current state of ccmGatewayTable. The initial value of this object is 0 and it will be incremented
every time when there is a change (addition/deletion/modification) to the ccmGatewayTable. This
value and ccmCallManagerStartTime should be used together to find if the table has changed or not.
When the call manager is restarted, this will be reset to 0.
::= { ccmGlobalInfo 24 }
ccmCTIDeviceTableStateId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The current state of ccmCTIDeviceTable. The initial value of this object is 0 and it will be
incremented every time when there is a change (addition/deletion/modification) to the
ccmCTIDeviceTable. This value and ccmCallManagerStartTime should be used together to find if
the table has changed or not. When the call manager is restarted, this will be reset to 0.
::= { ccmGlobalInfo 25 }