Specifications

6-310
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Informational-Level Alarms
Recommended Action
This alarm is for informational purposes only; no action is required.
CtiLineInService
Line is back in service
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CtiManager
Severity
INFORMATIONAL
Routing List
SDL
SDI
Sys Log
Event Log
Recommended Action
This alarm is for informational purposes only; no action is required.
8 Application cannot control this line as CTI Allow Control is not
enabled. Administrator has restricted the Line to be controllable by ap
-
plication. If the intent of the Administrator is to allow control of this
line, enable the check box labelled Allow control of Device from CTI,
in Unified CM Administration under Call Routing > Directory Number
and choose the line that should be controlled by this application
9 Unable to register the device; application specified media type is not
supported
10 Device is being reset; verify that the device is registered before opening
the line
11 Unsupported device configuration
Value Definition
History
Cisco Unified Communications
Release Action
8.0(1) Name changed from kCtiLineInService.
Severity changed from Notice to Informational.