Specifications

2-10
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 2 New and Changed Information
Cisco Unified Communications Manager, Release 8.0(1)
• CTI Manager Alarm Catalog—The following new CTI Manager alarms are added:
ThreadKillingError An error occurred when CMI tried to stop the CMI service.
UnknownException Unknown error while connecting to database.
VMDNConfigurationError The Voice Mail DN for CMI is invalid.
WritingFileFailure CMI failed to write SMDI messages to the serial port.
Alarm Name Description
ApplicationConnectionDropped Application has dropped the connection to
CTIManager.
ApplicationConnectionError CTIManager is unable to allow connections from
Applications.
CtiDeviceClosed Application closed a device.
CtiDeviceInService Device is back in service.
CtiDeviceOpenFailure Application is unable to open the device.
CtiDeviceOpened Application opened a device.
CtiDeviceOutofService Device is out of service.
CtiIncompatibleProtocolVersion Incompatible protocol version.
CtiLineClosed Application closed the line.
CtiLineInService Line is back in service.
CtiLineOpenFailure Application is unable to open the line.
CtiLineOpened Application opened the line.
CtiLineOpened Line is out of service.
CtiMaxConnectionReached Maximum number of CTI connections has been
reached, no new connection will be accepted unless an
existing connection is closed.
CtiProviderCloseHeartbeatTimeout CTI heartbeat timeout occurred causing CTIManager to
close the application connection.
CtiProviderClosed CTI application closed the provider. The IP address is
shown in either IPv4 or IPv6 format depending on the
IP addressing mode of the application.
CtiProviderOpenFailure CTI application is unable to open the provider. The IP
address is shown in either IPv4 or IPv6 format
depending on the IP addressing mode of the
application.
CtiProviderOpened CTI Application opened the provider successfully. The
IP address is shown in either IPv4 or IPv6 format
depending on the IP addressing mode of the
Application.
CtiQbeFailureResponse The requested operation from the application could not
be performed because of a normal or abnormal
condition.
Alarm Name Description