Specifications

2-9
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 2 New and Changed Information
Cisco Unified Communications Manager, Release 8.0(1)
• CDRRep Alarm Catalog—The following existing CDRRep alarms are updated:
• Certificate Monitor Alarm Catalog—The following new Certificate Monitor alarms are added:
• CMI Alarm Catalog—The following new CMI alarms are added:
Alarm Name Alarm Changes
CDRAgentSendFileFailed Changed Data Collector Routing List element to Alert
Manager.
CDRAgentSendFileFailureContinues Severity level is Error (3).
CDRFileDeliveryFailed Changed Data Collector Routing List element to Alert
Manager.
CDRFileDeliveryFailureContinues Severity level is Error (3).
CDRHWMExceeded Changed Data Collector Routing List element to Alert
Manager.
CDRMaximumDiskSpaceExceeded Facility and sub-facility changed. Added Routing List and
changed Data Collector to Alert Manager.
Alarm Name Description
CertValidLessthanADay Certificate is about to expire in less than 24 hours or has expired.
CertValidfor7days Alarm indicates that the certificate has expired or expires in less
than seven days.
CertValidityOver30Days Alarm indicates that the certificate expiry is approaching but the
expiry date is more than 30 days.
CertValidLessThanMonth Alarm indicates that the certificate will expire in 30 days or less.
Alarm Name Description
CMIException Error while reading the database.
CMIServiceStatus CMI service is running and working properly.
DBLException Unable to connect to the database.
InvalidPortHandle The handle for the opened serial port is invalid.
MemAllocFailed CMI tried to allocate memory and failed.
ParityConfigurationError The CMI service parameter, Parity, has an invalid configuration.
ReadingFileFailure CMI failed to read SMDI messages from the serial port.
SMDICmdError CMI receives an invalid incoming SMDI message.
SMDIMessageError SMDI message contains invalid DN.
SerialPortGetStatusError When CMI tries to get the status of serial port, the operating
system returns an error.
SerialPortOpeningError When CMI tries to open the serial port, the operating system
returns an error.
SerialPortSetStatusError When CMI tries to set the status of serial port, the operating
system returns an error.
StopBitConfigurationError The Cisco Messaging Interface service parameter, Stop Bits, has
an invalid configuration.