Specifications

6-122
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Error-Level Alarms
SerialPortGetStatusError
When CMI tries to get the status of serial port, the operating system returns an error.
CMI triggers this alarm when it cannot get the status of the serial port. An inability to receive the serial
port status information can be caused by a loose or disconnected USB cable.
Cisco Unified Serviceability Alarm Definition Catalog
CMIAlarmCatalog/CMI
Severity
ERROR
Routing List
Event Log
SDI
Parameter(s)
Serial Port Getting Status Error(String)
Recommended Action
Make sure that the cable connecting the USB0 port and voice messaging system is firmly connected.
SerialPortSetStatusError
When CMI tries to set the status of serial port, the operating system returns an error.
CMI triggers this alarm when it cannot set the status of the serial port. An inability to receive the serial
port status information can be caused by a loose or disconnected USB cable.
500 **INFO LEVEL** SAF_RESPONDER_ERROR - Unified CM sent a
message (such as register/unregister/publish/unpublish/subscribe) to the
SAF Forwarder but the SAF Forwarder responded that it is unable to process
the message at this time. This might be due to heavy message queuing,
internal resource issues, and so on. Unified CM will wait several seconds and
then retry the request. This alarm is for informational purposes only; no
action is required.
1000 SAF_INVALID_CONNECTION_DETAILS
Value Definition
History
Cisco Unified Communications
Release Action
8.0(1) Name changed from kSerialPortGetStatusError.