Specifications

6-120
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Error-Level Alarms
Enum Definitions - Reason Code
Value Definition
400 SAF_BAD_REQUEST - SAF Forwarder was unable to accept the request
due to incorrect syntax (malformed), missing required attributes, and other
similar reasons. Investigate the configuration between the SAF Forwarder
and Unified CM to be certain that all settings are correct for your deploy
-
ment. In particular, check the Client Label configured on the router to make
certain that it matches the Client Label configured in Cisco Unified CM Ad
-
ministration on the SAF Forwarder Configuration window (SAF > SAF For-
warder).
431 SAF_INTEGRITY_CHECK_FAILURE - A message failed to pass SAF
Forwarder security validation. This can occur because of misconfiguration, a
potential attack, or more commonly by incorrect provisioning of the
password on the Forwarder and SAF client. Reprovision the password and
keep a watch on further SAF INTEGRITY CHECK FAILURE alarms. If you
receive a persistent number of SAF INTEGRITY CHECK FAILURE alarms,
close the interface between SAF Forwarder and Unified CM and investigate
the source of the IP packets.
435 **INFO LEVEL** SAF_MISSING_NONCE - A nonce (a random parameter
generated when the message is sent) is missing from the message. The system
will resend with a new nonce automatically. No action is required.
436 SAF_UNKNOWN_USERNAME - Unified CM sent the SAF Forwarder an
Application User name that is not configured on the router or that does not
match the router's configuration. Check the Application User Name on the
router and in the Application User Configuration window in Cisco Unified
CM Administration to be sure they match.
438 **INFO LEVEL** SAF_STALE_NONCE - A nonce (a random parameter
generated when the message is sent) has aged out (gone stale). The system
will resend with a new nonce automatically. No action is required.
471 **INFO LEVEL** SAF_BAD_CLIENT_HANDLE -
SAF_BAD_CLIENT_HANDLE - Unified CM sent the SAF Forwarder a
Register message (for KeepAlive purposes) or unregister message with the
mandatory CLIENT_HANDLE value, but the SAF Forwarder did not
recognize the client handle. Unified CM will attempt to reregister with the
SAF Forwarder without a client handle. This alarm is for informational
purposes only; no action is required.
472 **INFO LEVEL** SAF_VERSION_NUMBER_TOO_LOW - Unified CM
published a service (such as Hosted DN) whose version number is now lower
than when it was previously published to the SAF Forwarder. The service is
out of sync with the SAF Forwarder. Unified CM will republish the service
in an attempt to resynch with the SAF Forwarder. This alarm is for informa
-
tional purposes only; no action is required.
473 **INFO LEVEL** SAF_UNKNOWN_SERVICE - Unified CM attempted
to unpublish a service from the SAF network but the SAF Forwarder does not
have a publish record for that service. This alarm is for informational
purposes only; no action is required.