Specifications

6-118
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Error-Level Alarms
Severity
ERROR_ALARM
Recommended Action
The alarm will include the name of the IME server, and the current and target quota values. The first
thing to check is to make sure that you have correctly provisioned the right set of DID prefixes on all of
the Unified CM clusters sharing that same IME server on the same IME distributed cache. If that is
correct, it means you have exceeded the capacity of your IME server, and you require another. Once you
have another, you can now split your DID prefixes across two different IME client instances, each on a
different IME server. That will alleviate the quota problem.
Routing List
SDL
SDI
Sys Log
Event Log
Parameter(s)
The DID for which the Publish was attempted(String)
Server name(String)
Current quota(UInt)
Maximum target quota(UInt)
ReadingFileFailure
CMI failed to read SMDI messages from the serial port.
CMI opened the serial port, however it failed to successfully read data from the serial port because the
serial port returned an invalid handle value to CMI. The serial port may have returned an invalid handle
because the system did not properly detect the USB cable.
Cisco Unified Serviceability Alarm Definition Catalog
CMIAlarmCatalog/CMI
Severity
ERROR
Routing List
Event Log
SDI
History
Cisco Unified Communications
Release Action
8.0(1) Name changed from kReadingFileFailure.