Specifications
6-95
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Error-Level Alarms
Recommended Action
Review the reason code and the recommended action within the reason code.
DeviceTypeMismatch
Device type mismatch between the information contained in the device's TFTP config file and what is
configured in the database for that device.
The device type indicated in the device's configuration file does not match the database configuration.
This could indicate that a change was made in the database configuration that failed to get updated at
the device itself.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
0x8CCC00D1
(2362179793)
Application is connecting to a non secure port but has security privileg-
es enabled for the user associated with the application. Check the user
group configuration for the user in Unified CM Admin under (User
Management > End User/Application User), select the user and verify
the associated permissions information
0x8CCC005F
(2362179679)
Standard CTI Use permission is not enabled. Users associated with ap-
plications are required to be included in "Standard CTI Enabled" user
group. Verify the user group configuration for the user in Unified CM
Admin under (User Management > End User/Application User), select
the user and review the associated permissions information
0x8CCC00D0
(2362179792)
User is not enabled for a secure connection but the application connect-
ing to secure port. Consider the application configuration and security
configuration for the user, for TAPI applications review the Control
Panel >Phone and Modem Options > Advanced > select a CiscoTSP >
Configure... > Security and disable "Secure Connection to CTIMan
-
ager". For JTAPI applications from JTPrefs choose Security and disable
"Enable Secure Connection". Also check the user group configuration
for the user in Unified CM Admin under (User Management > End Us
-
er/Application User), select the user and verify the associated permis-
sions information
Value Definition
History
Cisco Unified Communications
Release Action
8.0(1) Following information is updated:
• Enum Definitions for DBDeviceType
• Enum Definitions for DeviceType