Specifications

6-71
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Alert-Level Alarms
Parameter(s)
SSLErrorCode(UInt)
SSLErrorText(String)
TVSServerListenBindFailed
Fail to connect to the network port through which file requests are received. This usually happens if the
network port is being used by other applications on the system or if the port was not closed properly in
the last execution of TVS server.
Cisco Unified Serviceability Alarm Catalog
System/TVS
Severity
ALERT
Routing List
SDI
Event Log
Data Collector
Sys Log
Parameter(s)
nError(Int)
IPAddress(String)
Port(Int)
Recommended Action
Verify that the port is not in use by other application. After stopping the TVS server, at the command
line interface (CLI) on the TVS server, execute the following command: show network status listen. If
the port number specified in this alarm is shown in this CLI command output, the port is being used.
Restart the Cisco Unified Communications Manager system, which may help to release the port. If the
problem persists, go to Cisco Unified Serviceability and enable Detailed level traces in the Trace
Configuration window for the TVS service and contact the Cisco Technical Assistance Center (TAC).
TVSServerListenSetSockOptFailed
Failed to increase the size of the network buffer for receiving file requests. This usually indicates a lack
of memory when there is a system issue such as running out of resources.
Cisco Unified Serviceability Alarm Catalog
System/TVS
Severity
ALERT