Installation guide

Send documentation comments to [e-mail]
2-12
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Chapter 2 Cisco Nexus 5000 Series Overview
Cisco Nexus 5020 Switch
If you have one power supply installed in the chassis, but the other power supply slot is empty, you
should use a blank filler panel to cover the empty slot. Figure 2-16 shows a blank power supply filler
panel.
Figure 2-16 Blank Power Supply Filler Panele
Fan Modules
The Cisco Nexus 5020 switch has five fan modules. Figure 2-17 shows the fan module.
AC present, 3.3 voltage standby (VSB) on, and the power
supply unit is off.
1 Hz blinking Off
Power supply on and OK. On Off
Table 2-2 Power Supply LED Descriptions (continued)
Power Supply Condition Power LED Status Fail LED Status
186854