Specifications

3
• Additional Equipment, page 3
• Safety Information, page 4
Package Contents
Make sure that your package includes the following items:
• One Cisco IP Phone Expansion Module 7914
• One interface cable
• This Cisco IP Phone Expansion Module 7914 Phone
Guide
Footstand Kits
In addition to the items in the package, you also need a
Footstand Kit (separate orderable item). If you are attaching
one Expansion Module 7914, you need the single Footstand
Kit. If you are attaching two Expansion Module 7914s, you
need the double Footstand Kit. The Footstand Kit contains:
• One support bar (single with one thumbscrew, or double
with two thumbscrews)
• One footstand
Additional Equipment
You also need the following equipment.
• Small flat head screwdriver
—for use during the installation
• Power supply unit— depending on how many
Expansion Modules you are installing and how your
Cisco IP Phone is powered, you will require power supply
unit(s) as follows:
Power over the Ethernet to
your CiscoIPPhone
With one or two Expansion
Modules, you need a power
supply unit (separate
orderable item).