User guide

www.cisco.com
The Call Settings pane lets you specify:
• Auto Answer On or O. If you set this to On, the
system will respond automatically to incoming calls.
Note that the microphone wil NOT be muted. If risk of
eavesdropping is an issue, you may want to set this
setting to O.
• Auto Answer Delay. Specify the time until your
system actually reponds to an incoming call.
• Default Call Rate. If your connection has limited
capacity you may want to use this setting.
• Max Incoming/Outgoing Bandwidth. You may
specify these separately. May come in handy if you
are on an asymmetric connection.
• Default Call Protcol. Specify which protocol to use
as default.
Note how the settings chosen are indicated. In the
example shown, Auto Answer is set to O.
Administrator Settings—Call Settings
34
Cisco TelePresence System EX90 User guide
D14724.04 User guide EX90, TC4.1, February 2010.
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Contents
Contact us
Introduction
Connecting the EX90
Using the EX90
The settings
Web interface
The settings