User guide

www.cisco.com
Far end camera control
Do not disturb
If the other end point
permits it, you may
control their camera.
This is known as Far end
camera control.
If the other camera cannot
be controlled, nothing
happens.
This works in Point-to-
point calls as well as
MultiSite calls.
When set to Do Not Disturb (DND), ringtones are muted
and missed calls you get while having DND active, will be
presented when you exit DND..
You may, however, place calls as much as you like. To
activate this feature, press the icon in the upper left corner.
Press again to deactivate.
You may also hide the Do Not Disturb poster by tapping
Hide.
Using Touch Tones (DTMF)
Sometimes you may be urged to enter touch tones
(DTMF) during a call, typically to reach extensions or to
provide a pin code.
Tap the name, whose camera shall be
controlled, along the bottom line (

)
and then tap Camera Control (

).


Adjust zoom and pan as
required. Tap Back to exit the
menu
In a call,
tap More (

)
followed by
Touch Tones (

).
Use the
touch tone keypad.
Tap anywhere
outside it to exit.




22
Cisco TelePresence System EX90 User guide
D14724.04 User guide EX90, TC4.1, February 2010.
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Contents
Contact us
Introduction
Connecting the EX90
Using the EX90
The settings
Web interface
Using the EX90