User guide

www.cisco.com
Two calls at the same time
... then tap Favorites, Directory, or History ...
... then tap the entry to be called (

) and
nally tap START (

) to place the call.
In a call tap Hold to
put the current call
on hold ...
Click on the person
currently on hold
(here Berlin Sales
Oce) to be oered
swapping of the calls
or transferring the call
on hold to someone
else.
Optional feature:
If you drag Berlin
Sales Oce from the
bottom line and onto
the stage, you will
initiate a MultiSite call
(a video conference)
with yourself, Berlin
Sales Oce and
Peer Gynt.
Click on the
person you
currently talk
to (here Peer
Gynt) to
terminate or
transfer that call.
Transfer is available to SIP calls only and
the procedure is shown on the next page.


If your EX90 is equipped
with the optional MultiSite
feature you may also set up a
video conference with three
participants and yourself. See
“Calling more than one” on
page 18.
T
h
is is the
stage, see
text for
more
You will now be in a call with the
second person, while the rst one is
on hold. In this example, you talk to
Peer Gynt, while Berlin Sales Oce
is on hold.
16
Cisco TelePresence System EX90 User guide
D14724.04 User guide EX90, TC4.1, February 2010.
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Contents
Contact us
Introduction
Connecting the EX90
Using the EX90
The settings
Web interface
Using the EX90