Operating instructions

Chapter 5. Cisco Systems IGESM management and user orientation 29
The main pane displays the switch IP address, MAC address, and other information
supporting switch management, such as host name, serial number, IOS version, and uptime.
From the left menu, you can also launch the Cluster Management Suite, run diagnostics and
monitoring tools, and access the help resources.
Figure 5-2 Cisco Systems Intelligent Gigabit Ethernet Switch Module Home (12.1(14) IOS)
5.1.3 Cisco Systems IGESM Cluster Management Suite
General operating instructions for the CMS are discussed in the Cisco Systems Intelligent
Gigabit Ethernet Switch Module for the IBM Eserver BladeCenter Software Configuration
Guide. Details are available in the online help. You can find CMS summary information at:
http://www.cisco.com/warp/public/cc/techno/media/lan/ether/sgth/
The datasheet and presentation area available at:
http://www.cisco.com/warp/public/cc/techno/media/lan/ether/sgth/prodlit/index.shtml
To access CMS, you should first log on to the Cisco Systems Intelligent Gigabit Ethernet
Switch Module Home, which we discussed in 5.1.2, “Cisco Systems Intelligent Gigabit
Ethernet Switch Module Home” on page 28.
Note that CMS is available only with the 12.1(14) version of IOS for the CIGESM.
Click Cluster Management Suite on the switch module home page. Enter the user ID and
password of the switch, and you will be directed to a window similar to the one shown in
Figure 5-3 on page 30.