Operating instructions

214 Cisco Systems Intelligent Gigabit Ethernet Switch Module
򐂰 show flash: all
򐂰 show process memory
򐂰 show process cpu
򐂰 show vlan
򐂰 show clock
򐂰 show etherchannel summary
򐂰 show int trunk
򐂰 show cdp neighbors
򐂰 show spanning-tree summary
򐂰 show mac-address-table count
򐂰 show log
򐂰 show region
򐂰 show buffers
Some helpful items that are
not in show tech-support:
򐂰 show platform summary
򐂰 show int status
򐂰 show span blocked
show platform summary
show platform summary is important for showing data that no other IGESM command can
show, such as that certain options are configured on the Management Module.
Figure 8-4 illustrates some of the important attributes from this command.
Figure 8-4 Show platform summary attributes
show logging
Basically a local repository for events that have occurred on the switch, show logging is a
FIFO buffer that keeps track of console messages and other activity. The buffer can be
configured to be larger or smaller.
Look here for anything unusual or unexpected (such as links going down when they should
not or link state group changes) that may have occurred in the past.
Switch#sh platform summary
Platform Summary:
Switch Slot: 1
Current IP Addr: 172.26.147.208, 255.255.254.0, gw: 172.26.146.1
Default IP Addr: 10.10.10.91, 255.255.255.0, gw: 0.0.0.0
IP Fields read from VPD: 172.26.147.208, 255.255.254.0, gw: 172.26.146.1
Static IP Fields in VPD: 172.26.147.208 255.255.254.0 172.26.146.1
IP Acquisition Method used: static
(“Disabled” will show “user-config” after CIGESM reboot)
Active Mgmt Module in Mgmt Slot: 1
Native Vlan for Mgmt Module Ethernet ports: 1
External Mgmt over Extern ports Disabled
•Switch is in Bay 1
•MM advanced I/O module settings