Operating instructions

192 Cisco Systems Intelligent Gigabit Ethernet Switch Module
# 1st virtual interface in the team
TEAM_VA0_NAME=sw0
TEAM_VA0_VLAN=10
TEAM_VA0_IP=10.1.10.11
TEAM_VA0_NETMASK=255.255.255.0
# 2nd virtual interface in the team
TEAM_VA1_NAME=sw1
TEAM_VA1_VLAN=15
TEAM_VA1_IP=10.1.15.11
TEAM_VA1_NETMASK=255.255.255.0
# Optional default gateway
# One default gateway is usually specified for the system and it should be
# reachable from one network interface
TEAM_VA0_GW=10.1.10.254
#TEAM_VA1_GW=
򐂰 team-toCIGESM2
TEAM_ID=1
TEAM_TYPE=0
TEAM_NAME=toCIGESM2
# 1st physical interface in the team
TEAM_PA0_NAME=eth1
TEAM_PA0_ROLE=0
# 2nd physical interface in the team
#TEAM_PA1_NAME=eth1
#TEAM_PA1_ROLE=0
# 3rd physical interface in the team
#TEAM_PA2_NAME=eth2
#TEAM_PA2_ROLE=0
# 1st virtual interface in the team
TEAM_VA0_NAME=sw2
TEAM_VA0_VLAN=20
TEAM_VA0_IP=10.1.20.11
TEAM_VA0_NETMASK=255.255.255.0
# 2nd virtual interface in the team
TEAM_VA1_NAME=sw3
TEAM_VA1_VLAN=25
TEAM_VA1_IP=10.1.25.11
TEAM_VA1_NETMASK=255.255.255.0
# Optional default gateway
# One default gateway is usually specified for the system and it should be
# reachable from one network interface
#TEAM_VA0_GW=
#TEAM_VA1_GW=