Operating instructions

116 Cisco Systems Intelligent Gigabit Ethernet Switch Module
standby 1 ip 10.1.35.254
standby 1 timers 1 3
standby 1 priority 110
standby 1 preempt delay minimum 60
standby 1 authentication cisco
no shutdown
!
interface Vlan40
ip address 10.1.40.253 255.255.255.0
no ip redirects
no ip proxy-arp
arp timeout 200
standby 1 ip 10.1.40.254
standby 1 timers 1 3
standby 1 priority 110
standby 1 preempt delay minimum 60
standby 1 authentication cisco
no shutdown
!
interface Vlan45
ip address 10.1.45.253 255.255.255.0
no ip redirects
no ip proxy-arp
arp timeout 200
standby 1 ip 10.1.45.254
standby 1 timers 1 3
standby 1 priority 110
standby 1 preempt delay minimum 60
standby 1 authentication cisco
no shutdown
!
interface Vlan50
ip address 10.1.50.253 255.255.255.0
no ip redirects
no ip proxy-arp
arp timeout 200
standby 1 ip 10.1.50.254
standby 1 timers 1 3
standby 1 priority 110
standby 1 preempt delay minimum 60
standby 1 authentication cisco
no shutdown
line vty 0 4
password ese
login
!
7.4 Guidelines for attaching the BladeCenter to a Cisco
infrastructure
This section contains information about things to consider when attaching the BladeCenter to
a Cisco infrastructure. We highly recommend that you review this entire section prior to any
initial configuration changes. We also recommend that you review Appendix A, “Hints and
tips” on page 227. as well as 5.3, “In-depth management path discussions” on page 55.