Operating instructions

Chapter 6. IBM eServer BladeCenter system initial setup 97
6.3 Firmware and device drivers used in this example
We applied the following firmware and drivers to our environment:
򐂰 IBM eServer BladeCenter Management Module:
– Management Module Firmware Update Version 1.10
򐂰 BladeCenter HS20(8832) firmware:
– BladeCenter HS20 (Type 8832) - Flash BIOS Update Version 1.04
– BladeCenter HS20 (Type 8678,8832) - blade server integrated system management
processor firmware update Version 1.04
– Broadcom NetXtreme firmware level 3.21
򐂰 Cisco Systems Intelligent Gigabit Ethernet Switch Module firmware:
– Cisco Systems IGESM firmware build level 12.1 [14] AY
򐂰 BladeCenter HS20(8832) device drivers for Windows 2000 Advanced Servers:
– Broadcom NetXtreme Device Driver 7.33.00
– Broadcom Advanced Server Program 7.12.01
– Broadcom Advanced Control Suite 7.0.8
(All included in Broadcom NetXtreme Gigabit Ethernet Software CD for the
BCM570x-based servers and adapters Version 7.0.5.)
򐂰 BladeCenter HS20(8832) device drivers for Red Hat Linux AS 2.1:
– Broadcom BCM5700 Linux Driver Version 7.1.22
– Broadcom Advanced Server Program (BASP) Driver for Linux Version 6.2.1