Operating instructions

Chapter 6. IBM eServer BladeCenter system initial setup 87
2. Change the TFTP Root Directory to the location of the Cisco switch firmware to be
updated (Figure 6-7).
Figure 6-7 Switch firmware location
3. Click the Security tab and change the TFTP Server to Transmit and Receive files. Click
OK to save. The TFTP Server is now running.
Figure 6-8 TFTP Server Configuration window Security tab
Upgrading code
Use the Management Module graphical interface to start a Telnet session, as described in the
following steps, or if Remote Management is enabled on the external switch ports, open a
Telnet session from an attached workstation’s DOS prompt:
1. Access and log on to the Management Module Web interface, as described in “Accessing
the Management Module Web interface” on page 81.
2. From the I/O Module Tasks menu, click Management. The BladeCenter Management
Module window opens.