Specifications

2-22 Cisco 7010 Hardware Installation and Maintenance

Preparing Network Connections

For multimode connections, connect the multimode interface cable to the media interface cable

(MIC) connector. (See Figure 2-7.)

Figure 2-7 MIC Connector on a 4B/5B PLIM

For multimode SONET connections, connect the multimode cable to the SC connector on the PLIM.

(See Figure 2-8.)

Figure 2-8 SONET Multimode SC Duplex PLIM

The SONET multimode SC-duplex connector is shipped with a dust plug. (See Figure 2-9.) Remove

the plug by pulling on the plug as you squeeze the sides.

Figure 2-9 SONET ATM Multimode Fiber-Optic Transceiver and Dust Plug

H2213

2210

H1983