Specifications

FINAL DRAFT - CISCO CONFIDENTIAL
Index
IN-4
Cisco Cable Wideband Solution Design and Implementation Guide, Release 1.0
OL-10705-02
Linksys WCM300-NA modems
throughput
1-1
M
MAC Domains 3-6
MAC management 2-6, 3-2, 3-7
M-CMTS core 3-5
MIBs 1-2, 4-10
modems
See wideband cable modems
modular CMTS (M-CMTS)
architecture
3-4, 3-6
benefits 3-5
description 3-4
edge QAM (EQAM) device 3-5
See also CMTS
modulation rates
2-7
monitoring wideband components
Cisco Wideband SIP
5-2
Cisco Wideband SPA 5-3
RF channels 5-10
wideband cable modems 5-10
wideband channels 5-6
MPEG-TS packets 3-8
multicast traffic on Linksys WCM300 modems 4-6, 4-8
multiservice architecture 3-6
N
non-primary downstream channels 4-8
O
online insertion and removal (OIR)
Cisco Wideband SIP
2-9
Cisco Wideband SPA 2-20
operations support system (OSS) facilities 1-3
P
part numbers for components 2-4, 2-9
ping docsis command 5-19
primary bonded channels 4-6, 4-7
primary bonding group ID option 4-7
primary downstream channels
Linksys WCM300 modems
2-14
on a fiber node 3-3, 4-1
Scientific Atlanta DPC2505 and EPC2505
modems
2-16, 4-8
virtual bundle interfaces 3-3
wideband channels 3-2
Q
QAM output channels 3-8
quality of service (QoS) 3-8
R
Receive Channel Configuration (RCC) encodings 4-10
Receive Channel Set 4-10
recommended hardware configurations 2-4
redundancy
network layer
2-7
of components 2-4
REG-RSP message 4-10
reject-bad-rcc(208) code 4-9
restrictions 4-10
RF channels
adding with M-CMTS architecture
3-5
bonding 3-1
for wideband channels 3-8
matching EQAM device parameters 4-3
monitoring 5-10
number per Wideband SPA 1-3, 2-10
wideband cable modem 3-9
Route Processor Redundancy Plus (RPR+) feature 2-19