Specifications

3-46
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
disk
Removing All Disk Partitions on a Single Disk Drive
Use the disk delete-partitions EXEC command to remove all disk partitions on a single disk drive on
WAAS device.
Caution After using the disk delete-partitions EXEC command, the WAAS software treats the specified disk
drive as blank. All previous data on the drive is inaccessible.
Use this command when you want to add a new disk drive that was previously used with another
operating system (for example, a Microsoft Windows or Linux operating system). When asked if you
want to erase everything on the disk, specify “yes” to proceed, as follows:
WAE# disk delete-partitions disk01
This will erase everything on disk. Are you sure? [no] yes
Related Commands (config) disk
show disks