Specifications

3-23
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
copy running-config
copy running-config
To copy a configuration or image data from the current configuration, use the copy running-config
EXEC command.
copy running-config {disk filename | startup-config | tftp {hostname | ip-address}
remotefilename}
Syntax Description
Defaults No default behaviors or values
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines Use the copy running-config EXEC command to copy the WAAS device’s running system
configuration to a SYSFS partition, flash memory, or TFTP server. The copy running-config
startup-config EXEC command is equivalent to the write memory EXEC command.
Related Commands install
reload
show running-config
show startup-config
wafs
write
running-config Copies the current system configuration.
disk Copies the current system configuration to a disk file.
filename Name of the file to be created on disk.
startup-config Copies the running configuration to startup configuration (NVRAM).
tftp Copies the running configuration to a file on a TFTP server.
hostname Hostname of the TFTP server.
ip-address IP address of the TFTP server.
remotefilename Remote filename of the configuration file to be created on the TFTP server.
Use the complete pathname.