Specifications

SUM-1
Cisco Wide Area Application Services Command Reference
OL-11817-01
CLI COMMAND SUMMARY BY MODE
Configuration Mode Commands
(config) aaa accounting 3-252
(config) adapter 3-256
(config) alarm overload-detect 3-257
(config) asset 3-259
(config) authentication 3-260
(config) auto-register 3-265
(config) banner 3-268
(config) bypass 3-271
(config) cdp 3-273
(config) central-manager 3-275
(config) clock 3-278
(config) cms 3-282
(config) device mode 3-284
(config) disk 3-286
(config) end 3-288
(config) exec-timeout 3-289
(config) exit 3-290
(config) help 3-291
(config) hostname 3-293
(config) inetd 3-294
(config) interface 3-295
(config) ip 3-302
(config) ip access-list 3-305
(config) kerberos 3-308
(config) kernel 3-310
(config) line 3-311
(config) logging 3-312
(config) no 3-316
(config) ntp 3-318
(config) policy-engine application classifier 3-319
(config) policy-engine application map adaptor
EPM
3-321
(config) policy-engine application map adaptor WAFS
transport
3-323
(config) policy-engine application map basic
delete
3-325
(config) policy-engine application map basic
disable
3-326
(config) policy-engine application map basic
insert
3-327
(config) policy-engine application map basic
list
3-328
(config) policy-engine application map basic
move
3-329
(config) policy-engine application map basic
name
3-331
(config) policy-engine application map other optimize
DRE
3-333
(config) policy-engine application map other optimize
full
3-335
(config) policy-engine application map other
pass-through
3-336
(config) policy-engine application name 3-337
(config) policy-engine config 3-339
(config) port-channel 3-340
(config) primary-interface 3-341
(config) print-services 3-343
(config) radius-server 3-346
(config) smb-conf 3-348
(config) snmp-server access-list 3-352
(config) snmp-server community 3-353
(config) snmp-server contact 3-355
(config) snmp-server enable traps 3-356
(config) snmp-server group 3-359
(config) snmp-server host 3-361
(config) snmp-server location 3-363