Specifications

3-415
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
Interface Configuration Mode Commands
Use the interface configuration mode for setting, viewing, and testing the configuration of WAAS
software features on a specific interface. To enter this mode, enter the interface command from the
global configuration mode. The following example demonstrates how to enter interface configuration
mode:
WAE# configure
WAE(config)# interface ?
GigabitEthernet Select a gigabit ethernet interface to configure
InlineGroup Select an inline group interface to configure
InlinePort Select an inline port interface to configure
PortChannel Ethernet Channel of interfaces
Standby Standby groups
WAE(config)# interface gigabitethernet ?
<1-2>/ GigabitEthernet slot/port
WAE(config)# interface gigabitethernet 1/0
WAE(config-if)#
To exit interface configuration mode, enter exit to return to global configuration mode:
WAE(config-if)# exit
WAE(config)#