Specifications

3-391
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
(config) transaction-logs
parameter Specifies one of the following facilities:
auth Authorization system
daemon System daemons
kern Kernel
local0 Local use
local1 Local use
local2 Local use
local3 Local use
local4 Local use
local5 Local use
local6 Local use
local7 Local use
mail Mail system
news USENET news
syslog Syslog itself
user User process
uucp UUCP system
host Configures the remote syslog server.
hostname Hostname or IP address of the remote syslog server to which transaction
logs must be sent. No remote syslog server is specified by default.
ip-address IP address of the remote syslog server.
port (Optional) Configures the port to use when sending transaction log
messages to the syslog server.
port-num Destination port on the remote syslog host to which the WAE should send
the transaction log files. The default port number is 514. This port is a
well-known port for system logging.
rate-limit (Optional) Configures the rate at which the transaction logger is allowed
to send messages to the remote syslog server.
number-message-per-sec Number of messages that are allowed to be sent to the remote syslog host
per second. To limit bandwidth and other resource consumption,
messages to the remote syslog host can be rate-limited.
If this limit is exceeded, the specified remote syslog host drops the
messages. There is no default rate limit (rate-limit is set to 0), and by
default all syslog messages are sent to all of the configured syslog hosts.
The range is 1 to 10,000 messages per second.
archive Configures archive parameters.
interval Determines how frequently the archive file is to be saved.
seconds Frequency of archiving in seconds (120–604800).
every-day Archives using intervals of 1 day or less.
at Specifies the local time at which to archive each day.
hour:minute Time of day at which to archive in local time (hh:mm).
every Specifies the interval in hours. Interval aligns with midnight.