Specifications

3-390
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
(config) transaction-logs
(config) transaction-logs
To configure and enable transaction logging on a WAE, use the transaction-logs global configuration
command. To disable a transaction logging option, use the no form of this command.
transaction-logs tfo enable
transaction-logs tfo logging {enable | facility parameter | host {hostname | ip-address} [port
port-num] [rate-limit number-message-per-sec]}
transaction-logs tfo archive interval seconds
transaction-logs tfo archive interval every-day {at hour:minute | every hours}
transaction-logs tfo archive interval every-hour {at minute | every minutes}
transaction-logs tfo archive interval every-week [on weekdays at hour:minute]
transaction-logs tfo archive max-file-size filesize
transaction-logs export compress
transaction-logs export enable
transaction-logs export ftp-server {hostname | servipaddrs} login passw directory
transaction-logs export interval minutes
transaction-logs export interval every-day {at hour:minute | every hours}
transaction-logs export interval every-hour {at minute | every minutes}
transaction-logs export interval every-week [on weekdays at hour:minute]
transaction-logs export sftp-server {hostname | servipaddrs} login passw directory
Syntax Description tfo Specifies the TFO transaction log feature.
enable Enables the TFO transaction log feature.
logging Specifies logging TFO transactions to a remote syslog host.
enable Enables logging TFO transactions to a remote syslog host.
facility Specifies the appropriate transaction log facility.
This drop-down list is set to an initial value of Do not set. This setting
denotes that the facility sent to the syslog host will be the facility on the
local host that is sending the syslog message. For instance, in the case of
the transaction logging module that sends the real-time transaction log
message, the facility is the “user” facility