Specifications

2-13
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 2 Cisco WAAS Software Command Summary
undebug Disables the debugging functions.
(See
debug.)
privileged-level EXEC All
(config) username Establishes the username authentication. global configuration All
wafs Performs backup or restores system
configuration, and creates a system report on
a WAE.
privileged-level EXEC application
accelerator
(config) wccp access-list Configures the IP access list for inbound Web
Cache Coordination Protocol (WCCP)
GRE-encapsulated traffic on a WAE.
global configuration application
accelerator
(config) wccp flow-redirect Enables the WCCP flow redirection on a
WAE .
global configuration application
accelerator
(config) wccp router-list Creates a router list on a WAE for use in the
WCCP Version
2 services.
global configuration application
accelerator
(config) wccp shutdown Sets the maximum time interval after which
the WAE will perform a clean shutdown.
global configuration application
accelerator
(config) wccp slow-start Enables the slow start capability on a WAE. global configuration application
accelerator
(config) wccp
tcp-promiscuous
Configures the TCP promiscuous mode
service (WCCP Version 2 services 61 and 62)
on a WAE.
global configuration application
accelerator
(config) wccp version Specifies the WCCP version number. global configuration application
accelerator
whoami Displays the name of the current user. user-level EXEC and
privileged-level EXEC
All
windows-domain Accesses Windows domain utilities. privileged-level EXEC All
(config) windows-domain Configures Windows domain server options. global configuration All
write Writes or erases the startup configurations to
NVRAM or to a terminal session, or writes the
MIB persistence configuration to disk.
privileged-level EXEC All
Table 2-1 Command Summary (continued)
Command Description CLI Mode Device Mode