Specifications

3-356
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
(config) snmp-server enable traps
(config) snmp-server enable traps
To enable the WAAS device to send SNMP traps, use the snmp-server enable traps global
configuration command. To disable all SNMP traps or only SNMP authentication traps, use the no form
of this command.
snmp-server enable traps [alarm [clear-critical | clear-major | clear-minor | raise-critical |
raise-major | raise-minor] | config | content-engine [disk-fail | disk-read | disk-write |
overload-bypass | transaction-log] | entity | event | snmp [authentication | cold-start] |
wafs
[cslog | eslog | mgrlog]]
Syntax Description
Defaults This command is disabled by default. No traps are enabled.
Command Modes global configuration
alarm (Optional) Enables WAAS alarm traps.
clear-critical (Optional) Enables clear-critical alarm trap.
clear-major (Optional) Enables clear-major alarm trap.
clear-minor (Optional) Enables clear-minor alarm trap.
raise-critical (Optional) Enables raise-critical alarm trap.
raise-major (Optional) Enables raise-major alarm trap.
raise-minor (Optional) Enables raise-minor alarm trap.
config (Optional) Enables CiscoConfigManEvent traps.
content-engine (Optional) Enables SNMP WAAS traps.
disk-fail (Optional) Enables disk failure error trap.
disk-read (Optional) Enables disk read error trap.
disk-write (Optional) Enables disk write error trap.
overload-bypass (Optional) Enables WCCP overload bypass error trap.
transaction-log (Optional) Enables transaction log write error trap.
entity (Optional) Enables SNMP entity traps.
event (Optional) Enables Event MIB traps.
snmp (Optional) Enables SNMP-specific traps.
authentication (Optional) Enables authentication trap.
cold-start (Optional) Enables cold start trap.
wafs (Optional) Enables all WAFS-specific traps.
cslog (Optional) Enables the CS log traps.
eslog (Optional) Enables the ES log traps.
mgrlog (Optional) Enables the Manager log traps.