Specifications

3-342
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
(config) primary-interface
Examples The following example shows how to specify the Gigabit Ethernet slot 1 port 0 as the primary interface
on a WAAS device:
WAE(config)# primary-interface GigabitEthernet 1/0
The following example shows how to specify the Gigabit Ethernet slot 2 port 0 as the primary interface
on a WAAS device:
WAE(config)# primary-interface GigabitEthernet 2/0
Related Commands (config) interface