Specifications

3-329

Cisco Wide Area Application Services Command Reference

OL-11817-01

Chapter 3 CLI Commands

(config) policy-engine application map basic move

To move the application policy with the basic policy map list based on only L3 or L4 parameters on a

WA E , u se t h e policy-engine application map basic global configuration command.

policy-engine application map basic move from pos to pos

Syntax Description

Command Modes global configuration

Device Modes application-accelerator

Usage Guidelines Use the policy-engine application map basic global configuration command to move the application

policy with the basic policy map list based on only L3 or L4 parameters on a WAE.

Note We strongly recommend that you use the WAAS Central Manager GUI to centrally configure application

policies for your WAEs. For more information, see the Cisco Wide Area Application Services

Configuration Guide.

Examples To move a policy map from line 10 to line 16, enter the following:

WAE(config)# policy-engine application map basic move from 10 to 16

Related Commands (config) policy-engine application classifier

(config) policy-engine application map adaptor EPM

(config) policy-engine application map adaptor WAFS transport

(config) policy-engine application map basic delete

(config) policy-engine application map basic disable

(config) policy-engine application map basic insert

(config) policy-engine application map basic list

(config) policy-engine application map basic name

(config) policy-engine application map other optimize DRE

(config) policy-engine application map other optimize full

(config) policy-engine application map other pass-through

from Moves the policy at the specified line number.

to Moves the policy to the specified line number.

pos Line number indicating the exact position of a policy map in the list.