Specifications

3-316
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
(config) no
(config) no
To undo a global configuration command or set its defaults, use the no form of a global configuration
command.
no command
Syntax Description aaa Unconfigures AAA.
alarm Unconfigures alarm parameters.
authentication Unconfigures login authentication and authorization.
bypass Unconfigures bypass.
cdp Unconfigures CDP.
clock Unconfigures the time-of-day clock.
disk Unconfigures disk-related parameters.
exec-timeout Unconfigures the exec timeout.
help Unconfigures assistance for the command-line interface.
hostname Unconfigures the system’s network name.
inetd Unconfigures FTP, rcp, and TFTP services.
interface Not supported.
Note Although the CLI contains the no interface option, the no command
cannot be applied to an interface. The software displays the
following error message: Removing of physical interface is not
permitted.
ip Unconfigures IP parameters.
ip access-list Unconfigures IP access lists.
kerberos Unconfigures kerberos security options.
kernel Disables access to the kernel debugger.
line Unconfigures terminal line settings.
logging Unconfigures system logging (syslog).
ntp Unconfigures NTP.
port-channel Unconfigures port channel global options.
print-services Unconfigures the parameters for the WAAS print services.
radius-server Unconfigures RADIUS server parameters.
smb-conf Unconfigures the Windows domain smb.conf file.
sshd Unconfigures the parameters for the Secure Shell (SSH) service.
ssh-key-generate Unconfigures the SSH host key.
tacacs Unconfigures the TACACS+ parameters.
tcp Unconfigures the global TCP parameters.
telnet enable Disables the Telnet service.
username Unconfigures username authentication.
wccp Disables WCCP.
windows-domain Unconfigures Windows domain server parameters.