Specifications

3-313
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
(config) logging
facility Use one of the following keywords:
• auth—Authorization system
• daemon—System daemons
• kernel—Kernel
• local0—Local use
• local1—Local use
• local2—Local use
• local3—Local use
• local4—Local use
• local5—Local use
• local6—Local use
• local7—Local use
• mail—Mail system
• news—USENET news
• syslog—Syslog itself
• user—User process
• uucp—UUCP system
host Sets system logging to a remote host.
hostname Hostname of the remote syslog host. Specify up to four remote syslog hosts.
Note To specify more than one syslog host, use multiple command lines;
specify one host per command.
ip-address IP address of the remote syslog host. Specify up to four remote syslog hosts.
Note To specify more than one syslog host, use multiple command lines;
specify one host per command.
port (Optional) Specifies the port to be used when logging to a host.
port_num Port to be used when logging to a host. The default port is 514.
priority (Optional) Sets the priority level for messages when logging messages to a
host. The default priority is warning.
loglevel Use one of the following keywords:
• alert—Immediate action needed. Priority 1.
• critical—Immediate action needed. Priority 2.
• debug—Debugging messages. Priority 7.
• emergency—System is unusable. Priority 0.
• error—Error conditions. Priority 3.
• information—Informational messages. Priority 6.
• notice—Normal but significant conditions. Priority 5.
• warning—Warning conditions. Priority 4.