Specifications

3-294
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
(config) inetd
(config) inetd
To enable FTP and RCP services on a WAAS device, use the inetd enable global configuration
command. To disable these same services, use the no form of this command.
inetd enable {ftp | rcp}
Syntax Description
Defaults FTP is enabled; RCP is disabled.
Command Modes global configuration
Device Modes application-accelerator
central-manager
Usage Guidelines Inetd (an Internet daemon pronounced eye net dee) is a program that listens for connection requests or
messages for certain ports and starts server programs to perform the services associated with those ports.
Use the inetd enable command with the ftp and rcp keywords to enable and disable services on the
WAAS device. To disable the service, enter the no form of the inetd enable command. Use the show
inetd EXEC command to see whether current inetd sessions are enabled or disabled.
Examples The following example enables an FTP service session on the WAAS device:
WAE(config)# inetd enable ftp
The following example disables FTP services:
WAE(config)# no inetd enable ftp
Related Commands show inetd
enable Enables services.
ftp Enables FTP services.
rcp Enables RCP services.