Specifications

2-4
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 2 Cisco WAAS Software Command Summary
(config) exec-timeout Configures the length of time that an inactive
Telnet or SSH session remains open.
global configuration All
exit Exits from privileged EXEC mode. privileged-level EXEC All
(config) exit Exits from global configuration mode. global configuration All
(config-if) exit Exits from interface configuration mode. interface configuration All
(config-std-nacl) exit Exits from standard ACL configuration mode. standard ACL
configuration
All
(config-ext-nacl) exit Exits from extended ACL configuration
mode.
extended ACL
configuration
All
find-pattern Searches for a particular pattern in a file. privileged-level EXEC All
(config-if) full-duplex Sets the current interface to the
full-duplex
mode.
interface configuration All
(config-if) half-duplex Sets the current interface to
half-duplex
mode.
interface configuration All
(config-if) inline Configures inline interception for an
inlineGroup interface.
interface configuration All
help Provides assistance for the WAAS
command-line interface in EXEC mode.
user-level EXEC and
privileged-level EXEC
All
(config) help Provides assistance for the WAAS
command-line interface.
global configuration All
(config) hostname Configures the hostname of the WAAS device
in global configuration mode.
global configuration All
(config) inetd Enables FTP, RCP, and TFTP services. global configuration All
install Installs a new image into Flash memory. privileged-level EXEC All
(config) interface* Configures a Gigabit Ethernet, Port Channel,
or Standby interface. Provides access to
interface configuration mode.
global configuration All
(config) ip Configures the initial network device
configuration settings (for example, the IP
address of the default gateway) on a WAAS
device.
global configuration All
(config-if) ip Configures the IP address, subnet mask, or
DHCP IP address negotiation on the interface
of the WAAS device.
interface configuration All
(config-if) ip access-group Controls the connections on a specific
interface by applying a predefined access list.
interface configuration All
(config) ip access-list* Creates and modifies the access lists for
controlling access to interfaces or
applications. Provides access to ACL
configuration mode.
global configuration All
(config) kerberos Configures user authentication against a
Kerberos database.
global configuration All
Table 2-1 Command Summary (continued)
Command Description CLI Mode Device Mode