Specifications

2-3
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 2 Cisco WAAS Software Command Summary
copy system-status Copies the system status for debugging
reference.
privileged-level EXEC All
copy tech-support Copies system information for technical
support.
privileged-level EXEC All
copy tftp Copies the software image from the TFTP
server.
privileged-level EXEC All
cpfile Copies a file to the current directory. user-level EXEC and
privileged-level EXEC
All
debug Configures the debugging options.
Note The following debug options are
supported only in the application
accelerator device mode: dre, epm,
print-spooler, tfo, wafs, and wccp.
privileged-level EXEC All
(config-std-nacl) delete Deletes a line from the standard ACL standard ACL
configuration
All
(config-ext-nacl) delete Deletes a line from the extended ACL extended ACL
configuration
All
delfile Deletes a file. user-level EXEC and
privileged-level EXEC
All
deltree Deletes a directory and its subdirectories. user-level EXEC and
privileged-level EXEC
All
(config-std-nacl) deny Adds a line to a standard access-list that
specifies the type of packets that you want the
WAAS device to drop.
standard ACL
configuration
All
(config-ext-nacl) deny Adds a line to an extended access-list that
specifies the type of packets that you want the
WAAS device to drop.
extended ACL
configuration
All
(config) device mode Specifies the device mode of the WAAS
device.
global configuration All
dir Displays the files in long list format. user-level EXEC and
privileged-level EXEC
All
disable Turns off the privileged EXEC commands. privileged-level EXEC All
disk Allocates the disks among the cdnfs, cfs,
mediafs, and sysfs file systems.
privileged-level EXEC All
(config) disk Configures how the disk errors should be
handled.
global configuration All
dnslookup Resolves a DNS hostname. user-level EXEC and
privileged-level EXEC
All
enable* Accesses the privileged EXEC commands. user-level EXEC All
(config) end Exits configuration and privileged EXEC
modes.
global configuration All
Table 2-1 Command Summary (continued)
Command Description CLI Mode Device Mode